1.1 本规程用于估算按照规范规定要求级配的沥青结合料的连续级配温度和连续级配 D6373 . 1.2 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.3 本标准的文本引用了提供解释材料的注释和脚注。这些注释和脚注（不包括表和图中的注释和脚注）不应视为本标准的要求。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 连续级配温度和连续级配仅供参考，不得用于销售或购买沥青粘合剂。连续级配温度和连续级配可用于法医学或研究研究，以及生产、混合、改性或以其他方式评估沥青粘合剂时。本指南适用于规范 D6373 ，表1和2。 注1: 本标准产生的结果质量取决于执行程序的人员的能力以及所用设备的能力、校准和维护。 符合规范标准的机构 D3666 通常认为能够胜任和客观的测试、抽样、检查等。本标准的用户应注意遵守规范 D3666 单独使用并不能完全确保可靠的结果。可靠的结果取决于许多因素；遵循规范建议 D3666 或一些类似的可接受指南提供了评估和控制其中一些因素的方法。

1.1 This practice is used to estimate the continuous grading temperatures and continuous grade for an asphalt binder graded in accordance with the requirements specified in Specification D6373 . 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 The continuous grading temperatures and continuous grade are used for informational purposes only and shall not be used for the sale or purchase of asphalt binders. The continuous grading temperatures and continuous grade may be used for forensic or research studies and when producing, blending, modifying, or otherwise evaluating asphalt binders. This guide is applicable to Specification D6373 , Tables 1 and 2. Note 1: The quality of the results produced by this standard are dependent on the competence of the personnel performing the procedure and the capability, calibration, and maintenance of the equipment used. Agencies that meet the criteria of Specification D3666 are generally considered capable of competent and objective testing, sampling, inspection, etc. Users of this standard are cautioned that compliance with Specification D3666 alone does not completely ensure reliable results. Reliable results depend on many factors; following the suggestions of Specification D3666 or some similar acceptable guideline provides a means of evaluating and controlling some of those factors.