1.1本安全规范涵盖了消费者蹦床外壳的组件、组装、使用、标签和性能要求（见安全规范） F381 ). 1.2本规范适用于作为附件出售或与以下蹦床一起包装的蹦床外壳:( 1. )最小床尺寸为3300英寸。 2. （2.1米 2. ), ( 2. )最小高度为20英寸。（510毫米）( 3. )用于连续垂直跳跃活动，以及( 4. )供消费者使用。 1.3本规范包括以下章节和选定小节: 部分 范围 1. 参考文件 2. 术语 3. 组件 4. 一般要求 5. 性能要求 6. 性能测试 6. 信息包 7. 产品标记 8. 包装和包装标记 9 1.4本规范并非旨在解决与蹦床或蹦床围栏或两者相关的所有危险。仅凭标准的存在不一定能防止受伤。与其他体育活动一样，使用蹦床也有受伤的风险，尤其是如果设备使用不当。 同样，仅使用蹦床围栏并不一定能防止所有伤害。 1.5以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.6 以下预防性警告仅适用于本规范的测试方法部分。 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 This safety specification covers the components, assembly, use, labeling, and performance requirements of consumer trampoline enclosures (see Safety Specification F381 ). 1.2 This specification is applicable to trampoline enclosures to be sold as an accessory to or packaged with trampolines of ( 1 ) a minimum bed size of 3300 in. 2 (2.1 m 2 ), ( 2 ) a minimum height of 20 in. (510 mm), ( 3 ) intended for the purpose of continuous, vertical jumping activities, and ( 4 ) intended for consumer use. 1.3 This specification includes the following sections and selected subsections: Section Scope 1 Referenced Documents 2 Terminology 3 Components 4 General Requirements 5 Performance Requirements 6 Performance Tests 6 Information Packet 7 Product Marking 8 Packaging and Package Marking 9 1.4 This specification does not purport to address all of the hazards that may be associated with trampolines or trampoline enclosures, or both. The standard's existence alone will not necessarily prevent injuries. Like other physical activities, trampoline use involves the risk of injury, particularly if the equipment is used improperly. Similarly, the use of a trampoline enclosure alone will not necessarily prevent all injuries. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following precautionary caveat pertains only to the test methods portion of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.