1.1 本消费者安全性能规范涵盖了性能要求、测试方法和标记要求，以促进居住者安全使用固定活动中心。 1.2 本消费者安全性能规范旨在最大限度地降低因固定活动中心的正常使用和合理可预见的误用或滥用而导致的乘员事故风险。 1.3 在本消费者安全性能规范批准日期之后生产的固定活动中心不得通过标签或其他方式表明符合本规范，除非其符合本规范中包含的所有要求。 1.4 本消费者安全性能规范不旨在解决因其他人与固定活动中心的儿童乘员互动而导致的事故和伤害，也不旨在解决因能够行走的儿童虐待和误用而导致的事故。1.5 以英寸-磅单位表示的值应被视为标准值。括号中给出的值是对SI单位的数学转换，仅供参考，不被视为标准。 1.6 以下注意事项仅适用于试验方法部分，章节 7 本说明书: 本标准并不旨在解决与其使用相关的所有安全性问题（如果有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This consumer safety performance specification covers performance requirements, test methods, and marking requirements to promote safe use of a stationary activity center by an occupant. 1.2 This consumer safety performance specification is intended to minimize the risk of incidents to an occupant resulting from normal use and reasonably foreseeable misuse or abuse of a stationary activity center. 1.3 No stationary activity center produced after the approval date of this consumer safety performance specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.4 This consumer safety performance specification is not intended to address incidents and injuries resulting from the interaction of other persons with the child occupant in the stationary activity center or the incidents resulting from abuse and misuse by children able to walk. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following precautionary caveat pertains only to the test methods portion, Section 7 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.