本文件规定了确保安全设计、计算、， 移动、临时或永久安装机械和结构的制造和安装 供人们作为休闲活动使用，例如环岛、秋千、船、渡轮 轮子、过山车、滑梯、展位、侧展和艺术空中展示结构。以上 以下称为娱乐设备，可重复安装 不会退化或失去完整性，并且暂时或永久性地在游乐场和 游乐园或任何其他地点。主看台、施工现场装置、脚手架、， 可拆卸的农业结构，简单的投币式儿童娱乐设备，可携带 三个孩子，还有滑水橇或夏季滑雪橇等娱乐设备，还有操场 设备，绳索课程，攀岩墙，充气，蹦床，游泳池设备（此列表为 本文件未涵盖（不详尽）。 对于EN 13814-1要求未涵盖的所有设备，适用相关标准。 然而，本文件可用于任何类似结构或客运系统的设计 本文未明确提及的娱乐设备。 在工人的健康和安全方面，国家法规适用。 本文件适用于游乐设备和游乐设施的制造和重大改造 对于出版生效日期后的设计。交叉引用:EN 13814-3:2019EN 1090-2:2018EN 60204-1:2006/勘误表2010EN 1090-3:2008BS EN 13814-2:2019EN ISO 4034EN ISO 3834-3EN 14399（所有部分）EN ISO 9692-3HD 60364-4-41EN 1993-1-9EN ISO 9692-1HD 60364-7-740EN 50172EN ISO 14120EN ISO 4017EN 13796-1EN ISO 3834-2EN ISO 4032ISO 14119EN ISO 6158-1EN ISO 61549-1EN ISO 1219ISO 10042:2018EN ISO 4018HD 60364-5-54EN 60204-32EN ISO 14731EN 10204EN 1993- 1.1.1 1.1.1.1.1.1.1.1.1.1.1.1.1.10 10.16.6.6.6.6.6.1.1.1.6.6.1.1.1.1.1.1.1.1.1.1.1.1.1.8.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.8.1.1.1.1.1.1.1.1.1.1.1.1.8.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1 ISO 10325EN1992-1992-1992-1992-1992-1992-1992-1992-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 23849EN 13889ASTMF381GOST 12.2.049-80EN 13411（所有零件）EN 12385（所有零件）ISO 17842-2

This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of mobile, temporary or permanently installed machinery and structures which are intended for use by persons as a leisure activity, e.g. roundabouts, swings, boats, ferris wheels, roller coasters, chutes, booths, side shows, and structures for artistic aerial displays. The above items are hereafter called amusement devices, which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document. For all the equipment not covered by the requirements of EN 13814-1, the relevant standards apply. Nevertheless this document can be used in the design of any similar structural or passenger carrying amusement device not explicitly mentioned herein. In terms of workers' health and safety, national regulations apply. This document is applicable to manufacturing and major modification of amusement devices and rides for designs after the effective date of publication.Cross References:EN 13814-3:2019EN 1090-2:2018EN 60204-1:2006/corrigendum Feb. 2010EN 1090-3:2008BS EN 13814-2:2019EN 13814-2:2019EN ISO 4034EN ISO 3834-3EN 14399 (all parts)EN ISO 9692-3HD 60364-4-41EN 1993-1-9EN ISO 9692-1HD 60364-7-740EN 50172EN ISO 14120EN ISO 4017EN 13796-1EN ISO 3834-2EN ISO 4032ISO 10474EN ISO 14119EN 349EN 61558-1EN ISO 9692-2EN 1999-1-1EN 61800-5-2EN 12195-2EN ISO 4014EN ISO 10042:2018EN ISO 4018HD 60364-5-54EN 60204-32EN ISO 14731EN 10204EN 1993-1-8EN ISO 4414EN ISO 12100:2010EN ISO 4016EN ISO 898-1ISO 14118EN ISO 9712:2012EN ISO 9606-2EN ISO 17635EN ISO 4413EN 1993-1-1EN ISO 14732EN ISO 3834-4EN ISO 5817:2014EN ISO 9606-1EN ISO 13849 (all parts)EN ISO 13857EN 62305 (all parts)EN 1176 (all parts)EN 818 (all parts)EN 1991-1-4EN 62061EN 13200 (all parts)ISO/IEC Guide 71EN ISO 2307EN 10228-2ISO/TR 7250-2EN 10308EN ISO 10556EN ISO 10325EN 1992-1-1EN 1995-1-1EN 10160EN ISO 10554EN 10228-1ISO/TS 17929:2014EN 1677 seriesEN 14960EN ISO 1181EN ISO 1346AS 3533-1ISO 17842-1EN ISO 14122 (all parts)EN ISO 1141CEN/TS 16165EN 13001-3-1EN ISO 14688-2ASTM F2137EN ISO 9001ASTM F2291:2017EN 1069 (all parts)EN 1261EN 10025 (all parts)ISO 7250-1EN ISO 10572EN 10164EN ISO 10547EN 1837EN ISO 9554DIN 33402-2ISO 17842-3ISO/TR 23849EN 13889ASTM F381GOST 12.2.049-80EN 13411 (all parts)EN 12385 (all parts)ISO 17842-2All current amendments available at time of purchase are included with the purchase of this document.