ISO 10110-5:2015规定了用于制造和检验的技术图纸中光学元件和系统的设计和功能要求。 ISO 10110-5:2015规定了指示表面形状偏差公差的规则。 注:采用“条纹间距”单位的干涉测量术语广泛用于公差规范。然而，使用非干涉方法测试光学部件最近变得更加重要。因此，与ISO 10110本部分的早期版本不同，纳米现在应是表示表面形状偏差的首选和标准单位。考虑到明确规定了基本波长，仍然允许使用条纹间距。 ISO 10110-5:2015适用于平面、球面、非球面、圆形和非圆形圆柱、复曲面以及其他非球面的表面- 球形形状，如通常描述的表面。它不适用于衍射表面、菲涅耳表面和微光学表面。

ISO 10110-5:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. ISO 10110-5:2015 specifies rules for indicating the tolerance for surface form deviation. NOTE The terminology of interferometry employing the unit "fringe spacings" is widely used for the specification of tolerances. However, the usage of non-interferometric methods for testing of optical parts has recently become more important. Therefore, unlike in the earlier versions of this part of ISO 10110, nanometres shall now be the preferred and standard unit to express surface form deviations. The usage of fringe spacings is still permitted given that the base wavelength is explicitly stated. ISO 10110-5:2015 applies to surfaces of plano, spherical, aspheric, circular and non-circular cylindric, and toric form as well as to surfaces of other non-spherical shape such as generally described surfaces. It does not apply to diffractive surfaces, Fresnel surfaces, and micro-optical surfaces.