1.1 本指南 2. 制定可用于控制和维护工业射线照相胶片处理设备和材料的指南。有效使用这些指南有助于控制工业射线照相胶片处理的一致性和质量。 1.2 本指南的使用仅限于工业射线照相胶片的处理。本指南包括湿化学工艺和干加工技术的程序。 1.3 在一定程度上，应用特定控制程序（如本指南中所述）的必要性取决于设施作为常规程序遵守良好处理规范的程度。 1.4 如果是规范中所述的无损检测机构 E543 用于进行检测的，检测机构应满足规范的要求 E543 . 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任制定适当的安全、健康和环境实践，并在使用前确定联邦和地方规范的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本指南中的规定仅用于控制图像显影过程的可靠性或质量。以这种方式处理的工业射线照相胶片以及射线照相的材料或产品的可接受性或质量仍由用户或检查员或两者决定。 还打算将本指南用作指南的附件，而不是替代指南 E94 . 4.2 非机密胶片系统的用户可以使用中所述的监控胶片 8.3 用于薄膜处理的活性测试。 4.3 如果需要，薄膜系统制造商根据试验方法提供一份符合性声明，说明在给定加工条件下，其加工化学品中的薄膜类型分类 E1815 . 用户可以应用“混合系统”，其中胶片制造商不同于胶片显影化学品、处理系统和指定显影条件的制造商。在这种情况下，请参见 8.2.2 和 附录X1 .

1.1 This guide 2 establishes guidelines that may be used for the control and maintenance of industrial radiographic film processing equipment and materials. Effective use of these guidelines aids in controlling the consistency and quality of industrial radiographic film processing. 1.2 Use of this guide is limited to the processing of films for industrial radiography. This guide includes procedures for wet-chemical processes and dry processing techniques. 1.3 The necessity of applying specific control procedures such as those described in this guide is dependent, to a certain extent, on the degree to which a facility adheres to good processing practices as a matter of routine procedure. 1.4 If a nondestructive testing agency as described in Specification E543 is used to perform the examination, the testing agency should meet the requirements of Specification E543 . 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of federal and local codes prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 The provisions in this guide are intended to control the reliability or quality of the image development process only. The acceptability or quality of industrial radiographic films processed in this manner, as well as the materials or products radiographed, remain at the discretion of the user, or inspector, or both. It is further intended that this guide be used as an adjunct to, and not a replacement for, Guide E94 . 4.2 Users of non-classified film systems may use monitoring films as described in 8.3 for activity testing of film processing. 4.3 If required, film system manufacturers provide a conformity statement on the classification of their film types in their processing chemicals for given processing conditions according to Test Method E1815 . Users may apply “mixed systems” in which the film manufacturer is different from the manufacturer of the film development chemicals, processing system, and specified development conditions. In this case, see 8.2.2 and Appendix X1 .