首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
历史 ASTM E2632/E2632M-13e1
到馆提醒
收藏跟踪
购买正版
Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials 评估甲板材料甲板下耐火试验响应的标准试验方法
发布日期: 2013-02-01
1.1本标准规定了当用作甲板行走面时,评估甲板材料火灾试验响应特性的方法。在试验条件下,规定的火灾暴露旨在确定当暴露于模拟甲板下燃烧的可燃物的燃烧器火焰时,甲板材料的热释放速率和热分解模式。 2. 1.2以国际单位制或英寸-磅单位表示的数值应单独视为标准值。每个系统中规定的值不一定是精确的等价物;因此,每个系统应相互独立使用。 将两个系统的值结合起来可能会导致不符合标准。 1.3本标准用于测量和描述甲板材料在受控条件下对热量和火焰的响应,但其本身并不包括实际火灾条件下甲板材料火灾危险或火灾风险评估所需的所有因素。 1.4 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。 1.5防火测试本身具有危险性。在进行这些测试时,应采取适当的人员和财产保护措施。 ====意义和用途====== 5.1本试验方法通过评估甲板材料对与位于甲板材料下方的火源相关的火灾危险的反应来确定甲板材料的适用性。
1.1 This standard prescribes a method to assess the fire-test response characteristics of deck materials when used as the walking surface of a deck. The prescribed fire exposure is intended, under test conditions, to determine the heat release rate and the thermal decomposition modes of decking materials when exposed to a burner flame simulating combustibles burning beneath a deck. 2 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems has the potential to result in non-conformance with the standard. 1.3 This standard is used to measure and describe the response of deck materials to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the deck materials under actual fire conditions. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests. ====== Significance And Use ====== 5.1 This test method addresses the suitability of deck materials by assessing their response to fire hazards associated with sources of flame located beneath the deck material.
分类信息
关联关系
研制信息
归口单位: E05.14
相似标准/计划/法规
现行
ASTM E2632/E2632M-20
Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials
评估甲板材料甲板下耐火试验响应的标准试验方法
2020-02-01
现行
ASTM E2726/E2726M-12a(2017)
Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
评估甲板结构对燃烧品牌的耐火试验的标准试验方法
2017-12-15
现行
ULC 126
Standard Method of Test for Fire Spread Under Roof-Deck Assemblies (CAN/ULC S126-14)
屋顶甲板组件下火蔓延的标准试验方法(CAN/ULC S126-14)
2006-01-01
现行
ULC Subject 126
STANDARD METHOD OF TEST FOR FIRE SPREAD UNDER ROOF-DECK ASSEMBLIES (Bulletin, 10/6/2014)
屋顶甲板组件下火灾蔓延的标准试验方法(公告 10/6/2014)
2014-10-06
现行
ASTM E3426/E3426M-24
Standard Test Method for Evaluating Aerial Response Robot Endurance
评估空中反应机器人耐久性的标准试验方法
2024-02-01
现行
ASTM E2566-17a
Standard Test Method for Evaluating Response Robot Sensing: Visual Acuity
评估响应机器人感应的标准测试方法:视力
2017-09-01
现行
ASTM E2853/E2853M-22
Standard Test Method for Evaluating Ground Response Robot Capabilities: Search Tasks
评估地面反应机器人能力的标准试验方法:搜索任务
2022-05-01
现行
ASTM E2991/E2991M-17
Standard Test Method for Evaluating Response Robot Mobility: Traverse Gravel Terrain
评估响应机器人移动性的标准测试方法:横移砾石地形
2017-09-01
现行
ASTM E2992/E2992M-17
Standard Test Method for Evaluating Response Robot Mobility: Traverse Sand Terrain
评估反应机器人移动性的标准测试方法:横穿沙地形
2017-09-01
现行
ASTM E2874-23
Standard Test Method for Determining the Fire-Test Response Characteristics of a Building Spandrel-Panel Assembly Due to External Spread of Fire
外部火灾蔓延引起的建筑物拱肩板组件火灾试验响应特性测定的标准试验方法
2023-11-01
现行
ASTM E2854/E2854M-21
Standard Test Method for Evaluating Response Robot Radio Communications Line-of-Sight Range
评定机器人无线电通信视线范围的标准试验方法
2021-01-01
现行
ASTM E2828/E2828M-20
Standard Test Method for Evaluating Response Robot Mobility Using Symmetric Stepfields Terrains
用对称阶梯场地形评估响应机器人机动性的标准试验方法
2020-03-01
现行
ASTM E3380/E3380M-23
Standard Test Method for Evaluating Ground Response Robot Endurance Using Reproducible Terrains
使用可复制地形评估地面反应机器人耐久性的标准试验方法
2023-04-01
现行
ASTM E2802/E2802M-21e1
Standard Test Method for Evaluating Response Robot Mobility Using Variable Hurdle Obstacles
用可变跨栏障碍物评价机器人机动性的标准试验方法
2021-03-01
现行
ASTM E3408/E3408M-23
Standard Test Method for Evaluating Ground Response Robot Capabilities: Dexterity: Linear Inspection
评估地面反应机器人能力的标准试验方法:灵活性:线性检验
2023-09-15
现行
ASTM F1534-22
Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
测定缓冲材料在水浸后的耐火试验响应特性变化的标准试验方法
2022-06-01
现行
NFPA(Fire) 275
Standard Method of Fire Tests for the Evaluation of Thermal Barriers, 2022 Edition
评估隔热层的标准防火试验方法 2022年版
2021-10-22
现行
ASTM C1681-23
Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
在恒定应变下评定密封剂抗撕裂性的标准试验方法
2023-06-01
现行
ASTM D6087-22
Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
用探地雷达评估沥青混凝土桥面的标准试验方法
2022-11-01
现行
AASHTO TP 84-11(2017)
Standard of Method of Test for Evaluation of Adhesive Anchors in Concrete Under Sustained Loading Conditions
在持续荷载条件下评估混凝土中粘结锚的试验方法标准