1.1金相检验的主要目的是通过光学或扫描电子显微镜揭示金属及其合金的成分和结构。在特殊情况下，检查的目的可能需要比其他情况下更少的细节，但在几乎所有情况下，正确选择和制备样本至关重要。由于可用设备的多样性和遇到的各种各样的问题，以下文字仅为金相师提供了经验表明通常令人满意的实践指导； 它不能也没有描述解决单个样本制备问题所需的技术变化。 注1——有关各种金相技术的更广泛描述，请参阅Samuels，L.E。， 机械法金相抛光 ，美国金属学会（ASM）金属公园，俄亥俄州，第3版，1982年；Petzow，G。， 金相蚀刻，ASM，1978；和VanderVoort，G.，《金相学:原理与实践》 ，纽约州麦格劳·希尔，第二版，1999年。 1.2 本标准并非旨在解决与其使用相关的所有安全问题（如有）。 本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 The primary objective of metallographic examinations is to reveal the constituents and structure of metals and their alloys by means of a light optical or scanning electron microscope. In special cases, the objective of the examination may require the development of less detail than in other cases but, under nearly all conditions, the proper selection and preparation of the specimen is of major importance. Because of the diversity in available equipment and the wide variety of problems encountered, the following text presents for the guidance of the metallographer only those practices which experience has shown are generally satisfactory; it cannot and does not describe the variations in technique required to solve individual specimen preparation problems. Note 1--For a more extensive description of various metallographic techniques, refer to Samuels, L. E., Metallographic Polishing by Mechanical Methods , American Society for Metals (ASM) Metals Park, OH, 3rd Ed., 1982; Petzow, G., Metallographic Etching, ASM, 1978; and VanderVoort, G., Metallography: Principles and Practice , McGraw Hill, NY, 2nd Ed., 1999. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.