1.1本规程涵盖了在干船坞期间检查船舶上部结构和上部结构、储罐和空隙、甲板和甲板机械以及水下船体和引导装置涂层系统的标准程序。包括用于报告检查数据的标准检查表、划分上部结构和上部结构单个检查区域的图表，以及用于报告涂层系统损坏程度的一系列图表。 1.2本规程仅供经验丰富的船用涂料检查员使用。 1.3以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 本规程规定了船上涂层系统的检查程序。它包含一系列图表，用于报告涂层的损坏程度。

1.1 This practice covers a standard procedure for inspecting the coating system of a ship's topside and superstructure, tanks and voids, decks and deck machinery, and underwater hull and boottop during drydocking. Included are a standard inspection form to be used for reporting the inspection data, a diagram that divides topside and superstructure individual inspection areas, and a series of diagrams that are used to report the extent of damage to the coating system. 1.2 This practice is intended for use only by an experienced marine coating inspector. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== This practice establishes the procedure for the inspection of coating systems on board ships. It contains a series of diagrams to be used to report the extent of damage to coatings.