埋入元件印制板用电阻材料规范
Specification of embedded component resistive materials for printed circuit boards

2018-01-18

印制电路板设计要求
Design requirement for printed circuit board

2011-07-19

DESIGN AND USE OF COMPONENTS INTENTED FOR MOUNTING ON BOARD WITH WIRING AND PRINTED CIRCUITS
设计和使用拟安装在带有布线和印刷电路板上的组件

1975-06-15

高密度互连印制板设计要求
Design requirements for high density interconnect printed circuit boards

2016-01-19

印制板载流量设计要求
Requirement of current carrying capacity design in printed circuit boards

2018-01-18

Component Lead Cutting and Forming Equipment Electronic Printed Circuit Board - Inactive for New Design
元件引线切割和成型设备电子印刷电路板-不适用于新设计

2012-07-31

Printed boards and printed board assemblies. Design and use-Land pattern design. Generic requirements for dimensional drawings of surface mounted components (SMD) from the viewpoint of land pattern design
印制板和印制板组件 设计和使用

2019-07-12

Printed boards and printed board assemblies - Design and use - Part 6-4: Land pattern design - Generic requirements for dimensional drawings of surface mounted components (SMD) from the viewpoint of land pattern design
印制板和印制板组件.设计和使用.第6-4部分:版图设计.从版图设计的角度看表面安装组件（SMD）尺寸图的一般要求

2019-05-02

IEC 1188-5-2. Design and use of printed boards and printed board assemblies. Part 5. Sectional design and use requirements. Attachment (land/joint) considerations. Section 2. Discrete components 52/573/CD. Components with Gull-wing leads on two sides
IEC 1188-5-2 印制板和印制板组件的设计和使用 第五部分 分段设计和使用要求 附件（土地/联合）注意事项 第二节 分立元件52/573/CD 两侧带有鸥翼引线的部件

1995-07-12

IEC 1188-5-4. Design and use of printed boards and printed board assemblies. Part 5: Sectional design and use requirements - attachment (land/joint) considerations. Section 4: Components with J leads on two sides. 52/575/CD. Components with J leads on two sides
IEC 1188-5-4 印制板和印制板组件的设计和使用 第5部分:截面设计和使用要求——附件（接地/接头）注意事项 第4节:两侧带有J导线的部件 52/575/CD 两侧带有J导线的部件

1995-07-12

IEC 1188-5-3. Design and use of printed boards and printed board assemblies. Part 5. Sectional design and use requirements. Attachment (land/joint) considerations. Section 3. Components with gull-wing leads on two sides 52/574/CD. Components with Gull-wing leads on two sides
IEC 1188-5-3 印制板和印制板组件的设计和使用 第五部分 分段设计和使用要求 附件（土地/联合）注意事项 第三节 两侧带有鸥翼引线的部件52/574/CD 两侧带有鸥翼引线的部件

1995-07-12

Connectors for frequencies below 3 MHz for use with printed boards-Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
用于印制板的频率低于3MHz的连接器 集成电路用一系列插座的尺寸、一般要求和试验详细规范

1998-05-15

IEC 1188-5-7. Design and use of printed boards and printed board assemblies. Part 5.Sectional design and use requirements. Attachment (land/joint) considerations. Section 7. Components with post (DIP) mounting leads on two sides. 52/578/CD. Components with post (DIP) mounting leads on two sides
IEC 1188-5-7 印制板和印制板组件的设计和使用 第五部分 分段设计和使用要求 附件（土地/联合）注意事项 第七节 两侧带有立柱（DIP）安装引线的组件 52/578/CD 两侧带有立柱（DIP）安装引线的部件

1995-07-12

Draft Document - Printed board and printed board assemblies - Design and use - Part 5-8 : Sectional Requirement - Attachment (land/joint) considerations - Area array components (BGA, FBGA, CGA, LGA) (IEC 91/416/CD:2003)
文件草稿印制板和印制板组件设计和使用第5-8部分:分要求附件（焊盘/接头）注意事项面阵元件（BGA、FBGA、CGA、LGA）（IEC 91/416/CD:2003）

2004-01-01

Printed boards and printed board assemblies - Design and use - Part 6-4: Land pattern design - Generic requirements for dimensional drawings of surface mounted components (SMD) from the viewpoint of land pattern design (IEC 61188-6-4:2019); German version EN IEC 61188-6-4:2019
印制板和印制板组件.设计和使用.第6-4部分:接地图案设计.从接地图案设计的角度看表面安装组件（SMD）尺寸图的一般要求（IEC 61188-6-4-2019）；德文版EN IEC 61188-6-4:2019

2020-04-01

인쇄 기판에 사용하는 3 MHz 미만 주파수용 커넥터 — 제12부: 집적 회로에 사용하도록 설계된 소켓의 치수, 일반 요구사항의 시험에 대한 개별 규격
用于频率低于3 Mhz的连接器用于印刷电路板 - 第12部分:尺寸详细规格 适用于集成电路的一系列插座的一般要求和测试

2014-12-09

频率低于3 MHz的印制板连接器　第12部分：集成电路插座的尺寸、一般要求和试验方法详细规范
Connectors for frequencies below 3 MHz for use with printed boards—Part 12:Detail specification for dimensions,general requirements and tests for a range of sockets designed for use with integrated circuits

2011-12-30

인쇄 기판에 사용하는 3 MHz 미만 주파수용 커넥터 — 제12부: 집적 회로에 사용하도록 설계된 소켓의 치수, 일반 요구사항의 시험에 대한 개별 규격
印制板用频率低于3MHz的连接器第12部分:集成电路用插座尺寸、一般要求和试验的详细规范

2014-12-09

Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
用于频率低于3 Mhz的连接器用于印刷电路板 - 第12部分:尺寸详细规格 适用于集成电路的一系列插座的一般要求和测试

1992-06-25

Draft Document - Printed boards and printed board assemblies - Design and use - Part 5-4: Sectional requirements - Attachment (land/joint) consideration - Components with J leads on two sides (IEC 91/464/CDV:2004); German version prEN 61188-5-4:2004
文件草案.印制板和印制板组件.设计和使用.第5-4部分:分段要求.附件（焊盘/接头）考虑.两侧带J引线的部件（IEC 91/464/CDV:2004）；德文版prEN 61188-5-4:2004

2004-10-01