1.1本规程涵盖了水上游乐设备的制造、施工、操作和维护信息，并提供了各类公共水上游乐组件和水上游乐复合结构的安全性能标准。 1.2 夹杂物 : 1.2.1可攀爬和抗攀爬的水上游戏组件、复合水上游戏结构、用户控制装置、喷水装置、喷泉和发生在湿甲板和涉水、游泳或休闲池上的滑梯。本文规定的游戏组件用于水上游戏区。 1.2.2游戏设备、坠落区、湿甲板使用区、涉水池、游泳池和休闲池。 1.2.3本标准适用于位于循环水和饮用水娱乐设施内及其周围的水上游戏设备。此类设施包括但不限于游乐园、主题公园、水上公园、家庭娱乐中心、市政游泳池和市政公园。 1.2.4高度小于等于6英尺的水滑道。 1.3 除外责任 : 1.3.1没有进入或进入湿甲板、涉水池、游泳池或水上娱乐池的入口或出口的游乐场设备。 1.3.2《消费者安全性能规范》F 1148中规定的家庭游乐场或家庭泳池设备或游乐设备 和ANSI/NSPI-5。 1.3.3实践F 2376中规定的水滑道范围 -08 1.3.4用于滑水梯或游泳池的浮选装置。 1.3.5 ANSI/NSPI-1或ANSI/IAF-9规定的游泳池。 1.3.6专门为残疾人进出泳池而设计的产品或设施元件。 1.3.7水上游乐设施，如原木水槽、筏式游乐设施、内管式游乐设施、滑水设施或其他景点，参与者坐在车内或由水推动或移动。 1.3.8运动器材、健身器材和跳水器材。 1.4 顺从 : 1.4.1间接或直接向消费者安全性能规范F 1487加水或用水 -07A播放设备，该设备应符合本标准。如果符合消费者安全性能规范F 1487的一节要求 -07A标准是本标准的要求，章节号前面有标准的名称。 1.4.2带有水上游戏组件的软性游戏结构应符合安全性能规范F 1918 -04除非本标准修改。 1.4.3符合本安全性能标准的水上游乐组件和复合游乐结构应符合本文规定的所有适用要求。代表符合本标准的任何人应保留必要的记录，以记录已满足本标准要求的任何声明。 1.5本标准包括以下章节: 范围 第1节 参考文件 第2节 术语 第3节 制造和材料 第4节 设计 第5节 性能要求 第6节 操作员职责 第7节 制造商/设计师 责任 第8节 安装人员职责 第9节 1.6以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。（从英寸-磅到公制单位的转换系数为1英寸=25.4毫米，1磅=4.4482 N。） 1.7 本标准并非旨在解决与其使用相关的所有安全问题（如有）。 本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 This practice covers information for manufacture, construction, operations and maintenance of aquatic play equipment and provides safety performance standards for various types of public aquatic play components and aquatic play composite structures. 1.2 Inclusions : 1.2.1 Climbable and climb-resistant aquatic play components, composite aquatic play structures, user controls, water sprays, fountains, and slides that occur on wet decks and wading, swimming or leisure pools. The play components specified herein occur for use in aquatic play areas. 1.2.2 Play equipment, fall zones, use zones for wet decks, wading pools, swimming pools and leisure pools. 1.2.3 This standard is intended to apply to Aquatic Play Equipment that is located in and around re- circulated and potable water recreational facilities. Such facilities include but are not limited to amusement parks, theme parks, water parks, family entertainment centers, municipal swimming pools and municipal parks. 1.2.4 Waterslides 6 ft in height or smaller. 1.3 Exclusions : 1.3.1 Playground equipment that does not have an entry or an exit onto or into a wet deck, wading pool, swimming pool or aquatic recreation pool. 1.3.2 Home playground or home pool equipment or play equipment as scoped in Consumer Safety Performance Specification F 1148 and ANSI/NSPI-5. 1.3.3 Waterslides as scoped in Practice F 2376 -08 1.3.4 Flotation devices used on water slides or in swimming pools. 1.3.5 Swimming pools as specified by ANSI/NSPI-1 or ANSI/IAF-9. 1.3.6 Products or facility elements specifically designed to provide access to and from pools for people with disabilities. 1.3.7 Water rides such as log flumes, raft rides, inner tube rides, waterslides or other attractions where the participant sits in a vehicle or is physically propelled or moved by or with water. 1.3.8 Sports equipment, fitness equipment, and diving equipment. 1.4 Compliance : 1.4.1 Where water is indirectly or directly added or applied to Consumer Safety Performance Specification F 1487 -07A play equipment, the equipment shall comply with this standard. Where a requirement for compliance to a section of the Consumer Safety Performance Specification F 1487 -07A standard is required by this standard, the section number is preceded with the standard's designation. 1.4.2 Soft contained play structures with aquatic play components shall comply with Safety Performance Specification F 1918 -04 except as modified by this standard. 1.4.3 Aquatic play components and composite play structures represented, as complying with this safety performance standard shall meet all applicable requirements specified herein. Anyone representing compliance with this standard shall keep such essential records as are necessary to document any claim that the requirements within this standard have been met. 1.5 This standard includes the following sections: Scope Section 1 Referenced Documents Section 2 Terminology Section 3 Manufacturing and Materials Section 4 Design Section 5 Performance Requirements Section 6 Operator Responsibilities Section 7 Manufacturer/Designer Responsibilities Section 8 Installer Responsibilities Section 9 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. (The conversion factor from inch-pound to metric units is 1 in. = 25.4 mm, and 1 lb = 4.4482 N.) 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.