1.1 本规程规定了设计人员/工程师认为不在其他ASTM F24设计标准范围内的游乐设施和设备的设计信息和程序，以及对游乐设施和设备的重大修改。 1.1.1 在将游乐设施或装置指定为其他ASTM F24标准范围外并符合惯例之前 F1159 ，设计师/工程师应审查ASTM F24委员会管辖下的所有关于游乐设施和设备设计的标准，并确定该做法 F1159 适用于机动游戏机或设备，而非其他ASTM委员会F24关于机动游戏机和设备设计的实践。 1.1.2 在作出此类决定时，设计师/工程师应考虑以下因素: 1.1.2.1 机动游戏机或装置的一般性质； 1.1.2.2 缺乏其他ASTM委员会F24实践中提出的相关具体要求或特征。 1.2 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 3.1 本规程为其他ASTM委员会F24标准中未提及的游乐设施和设备的设计师/工程师提供了设计参考和标准，以用于设计开发。

1.1 This practice establishes information and procedures for the design of amusement rides and devices and major modifications to amusement rides and devices which the designer/engineer identifies as outside the purview of other ASTM F24 design standards. 1.1.1 Prior to designating an amusement ride or device as outside the purview of other ASTM F24 standards and subject to Practice F1159 , the designer/engineer shall perform a review of all standards under the jurisdiction of the ASTM Committee F24 addressing amusement ride and device design and determine that Practice F1159 is appropriate and more applicable to the amusement ride or device than other ASTM Committee F24 practices addressing amusement ride and device design. 1.1.2 In making such a determination, the designer/engineer shall consider the following: 1.1.2.1 The general nature of the amusement ride or device; 1.1.2.2 The absence of relevant specific requirements or features addressed by other ASTM Committee F24 practices. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== 3.1 This practice provides designers/engineers of amusement rides and devices not addressed in the other ASTM Committee F24 standards with design references and criteria to use in design development.