Printed wiring boards-Guide for the design and use of printed wiring boards
印刷线路板 印制线路板的设计和使用指南

1991-08-30

Printed wiring boards-Guide for the design and use of printed wiring boards: surface mounted devices
印刷线路板 印刷线路板的设计和使用指南:表面安装设备

1991-02-28

DESIGN REQUIREMENTS FOR RIGID PRINTED WIRING BOARD
刚性印刷线路板的设计要求

1986-01-01

刚性印制板及刚性印制板组装件设计标准
Design standard for rigid printed boards And rigid printed board assemblies

1999-11-10

Generic Standard on Printed Board Design
印制板设计通用标准

2012-11-01

DESIGN AND USE OF COMPONENTS INTENTED FOR MOUNTING ON BOARD WITH WIRING AND PRINTED CIRCUITS
设计和使用拟安装在带有布线和印刷电路板上的组件

1975-06-15

Sectional Design Standard for Rigid Organic Printed Boards
刚性有机印制板的截面设计标准

2020-10-01

Standard for Printed-Wiring Boards (Bulletin, 3/23/2017)
印制线路板标准（公告 2017年3月23日）

2017-03-23

Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
挠性/刚挠性印制板的分段设计标准

2020-01-24

Sectional Design Standard for High Density Interconnect (HDI) Printed Boards
高密度互连（HDI）印制板的分段设计标准

2017-09-01

Guidelines for Selecting Printed Wiring Board Sizes Using Standard Panel Sizes
使用标准面板尺寸选择印刷线路板尺寸的指南

1984-09-01

Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
印刷线路板接触件上存在外来物质的标准测试方法

2020-10-01

Standard for Printed-Wiring Boards (Certification Requirement Decision, 10/5/2016)
印制线路板标准（认证要求决定 10/5/2016）

2016-10-05

Terms & Definitions, Test Methods, and Design Examples for Buld-Up/High Density Interconnect (HDI) Printed Wiring Boards
Buld Up/High Density Interconnect（HDI）印制电路板的术语和定义、试验方法和设计示例

2000-01-01

Standard for Polymeric Materials - Flexible Dielectric Film Materials for Use in Printed-Wiring Boards and Flexible Materials Interconnect Constructions (Bulletin, 4/28/2014)
聚合物材料标准.印刷线路板和柔性材料互连结构用柔性介电薄膜材料（公告 4/28/2014）

2014-04-28

PRINTED WIRING BOARDS, RIGID (INACTIVE FOR NEW DESIGN AFTER 31 DECEMBER 1997, USE MIL-PRF-31032) (SUPERSEDING MIL-P-55110E)(S/S BY MIL-PRF-55110G)
刚性印刷线路板（1997年12月31日以后的新设计不起作用 使用MIL-PRF-31032）（取代MIL-P-55110E）（S/S由MIL-PRF-55110G代替）

1998-11-27

CONNECTOR, PRINTED CIRCUIT SUB-ASSEMBLY AND ACCESSORIES PLUG, STRAIGHT-THRU, DOUBLE ROW, FOR STANDARD PRINTED WIRING BOARDS (1/16", 3/32", 1/8" THICK) (.100 SPACING) CONNECTORS ARE 50, 60, 80, 100, 120 CONTACT POSITIONS (NO S/S DOCUMENT)
印刷电路连接器和附件标准打印接线板（1/16“ 3/32” 1/8“厚度）（.100间距）连接器的连接器直径为50mm 60 80 100 120接触位置（无S/S文件）

1988-11-30

CONNECTOR, PRINTED CIRCUIT SUB-ASSEMBLY AND ACCESSORIES PLUG, STRAIGHT-THRU, DOUBLE ROW, FOR STANDARD PRINTED WIRING BOARDS (1/16", 3/32", 1/8" THICK) (.100 SPACING) CONNECTORS ARE 50, 60, 80, 100, 120 CONTACT POSITIONS (NO S/S DOCUMENT)
标准印刷线路板（1/16英寸、3/32英寸、1/8英寸厚）（.100间距）用直通双排印刷电路子组件和附件插头连接器50、60、80、100、120接触位置（无S/S文件）

1983-09-13