本欧洲标准适用于平板玻璃破碎机，包括以下步骤:运输和定位，拆卸，将切割尺寸运送到卸载位置，引导废弃平板玻璃。 1.2本欧洲标准涉及在平板玻璃按预期使用的情况下以及制造商合理预见的误用条件（见第4条）时与机器相关的重大危险，危险情况和事件。 EN 619对输送机处理的危险除外。本欧洲标准规定了适当的技术措施，以消除或减少在调试，运行和维护过程中的重大危害引起的风险。噪音危害不算重要。 1.3本欧洲标准不适用于夹层玻璃切割机的切割操作（打开切割）（见EN 13035-7）。 1.4本欧洲标准不适用于废弃平板玻璃的处理，例如将废弃平板玻璃粉碎和/或充入垃圾箱，集装箱。 1.5本欧洲标准不适用于输送机的重大危险。如果输送机与机器的合作出现特定的危险

This European Standard applies for machines for break-out of flat glass including the following steps: transport and positioning, break-out, transport of the cut sizes to the unloading position, leading away of waste flat glass. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to machines for the break-out of flat glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Those hazards which are dealt with in EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Hazards from noise are not considered to be significant. 1.3 This European Standard is not applicable to the break-out operation (opening the cut) of cutting ma-chines for laminated glass (see EN 13035-7). 1.4 This European Standard is not applicable to the treatment of waste flat glass such as crushing and/or charging of waste flat glass into bins, containers. 1.5 This European Standard does not apply to the significant hazards of conveyors. If there are specific hazards which arise by the co-operation of conveyors with machines for break-out of flat glass, appropriate measures are specified. 1.6 This European Standard is not applicable to machines for break-out of flat glass which are manufac-tured before the date of publication of this European Standard by CEN.